Advantages of aluminum honeycomb panel for partition
(1)fire prevention: aluminum plate is non-combustible material.
(2)corrosion resistance: the surface of aluminum honeycomb sandwich panels
are treated with epoxy fluorocarbon, which has strong corrosion resistance. Salt fog spray lasts for 48 hours and it is without pinhole, crack or blister.
(3)environmental - friendly: honeycomb panel is pure aluminum products, it does not volatilize any harmful gas to human, and it is not radioactive and can be completely recycled. It is environmental - friendly product.
(4)aluminum honeycomb panel is easy to dismantle and assemble, and will not destroy the plate. Because of its light weight and convenient transportation, it can be transported to different places for repeated use. It is why the other partition panel can not be compared with it.
1.The lug type: this installation method is separating lug and honeycomb panel. The lifting lug is separately processed and connected with the rubber seam position of the honeycomb panel. Suitable width of glue joint is 12mm. This installation method makes process simple and installation is convenient.
2.Turn-over type: this installation method is to process aluminum honeycomb plate with installation flanging. The installation only needs connect with the keel and the glue seam place according to the position. Suitable glue seam width is more than 10mm. This method is convenient to install, but slightly complicated to process, and it is not suitable for molding curtain wall board.
3.Buckle type: this node is aluminum buckle type, buckle is a specific profile, and installation is simple. But this method requires high precision of plate processing. It is not recommended to use the board longer than 3000mm. According to the width of the buckle, the plate has a seam of 20mm and 40mm, etc.