is plywood. Simply speaking, the production process of sandwich board is that wood rotary cutting is similar to pencil sharpening with pencil sharpener. The blade is fixed. Once the pencil rotates, the blade sentence cuts the pencil into thin slices. Wood is rotated by a special rotary cutting machine, which rotates the wood on a fixed blade, so that the blade cuts the logs into very large thin pieces. Decorative panels are made of high-grade wood with distinct wood grain. They are very thin, the thinnest is only 0.3mm, and the thickest is only 2-3mm. There are also very thick wood chips, the thickest veneer can be up to 8 mm. At present, other domestic equipment can be the thickest rotary cutting 4 mm, thus saving adhesives, reducing formaldehyde emissions and improving wood utilization. Bamboo can also be cut into bamboo slices. Because the veneer of bamboo is used for veneer of wood-based panels, the thickness of the veneer should not exceed 1mm, generally 0.2-0.5mm.
Process of plywood production: Log (artificial fast-growing and High-yielding diameter wood) has fixed-thickness rotary-cutting round and fixed-thickness rotary-cutting thick core board with clamping axle, degrading rotary-cutting veneer in front of stress, degrading rotary-cutting veneer in reverse of stress, degrading drying single-sided cutting 45 angle-guide dressing inclined seam splicing and coating blank, splicing board (cold pressing), and hot-pressing edge-sawing fixed-thickness sanding to check the finished plywood into warehouse.
As a sandwich panel supplier,
we specialize in the production of sandwich panels
, product specifications are complete, quality assurance, welcome to buy.