On the morning of April 28, 2018, the Shenzhen Clean Industry Association's first phase of Shenzhen Clean Engineering Professional Training in 2018 opened in Shenzhen Clean Industry Association! Lin Zhenggang, President of Shenzhen Clean Industry Association, attended and delivered a speech. The ceremony was hosted by Ma Junjie, Assistant to the President of Shenzhen Clean Industry Association. Dean of Liu Jianjun, Medical Design and Design Institute of Beijing Construction Engineering Design Institute (Beijing Jianzhu University), The Clean Surgery Department Design gave a wonderful speech for the cleanroom engineering
. About 150 clean engineering related engineering management, design, construction, technology and other personnel participated in the training.
President Lin Zhenggang gave a speech
President Lin pointed out: This training is an important measure to strengthen the construction of the association, improve the quality of all staff, and build quality associations. The aim is to improve the quality of clean engineers, enhance their sense of responsibility, enhance their professionalism, enterprising spirit, and enhance the ability of clean engineers to perform their duties. I hope that all of you will consciously abide by discipline, seize valuable study time, and complete good training tasks.
Assistant Director Ma Junjie presided over
In accordance with the medium and long-term planning instructions for the construction of high-tech talents in the country, in order to meet the needs of talent cultivation in the clean industry, and to further solve the problem of talent shortage, the requirements of enterprises in the fields of cleanliness, construction, decoration, medical and health, medicine, food, etc. should be better. Service member companies, Shenzhen Clean Industry Association invited Chinese well-known clean industry experts, senior clean engineers of well-known enterprises, experts in measurement quality inspection institutes, etc., to carry out training on clean technology, clean standards, measurement quality inspection and medical project case sharing.
At the opening ceremony, Lin Zhenggang, president of Shenzhen Clean Industry Association, presented the Shenzhen Clean Industry to Liu Jianjun, Dean of the Medical Design and Design Institute of Beijing Construction Engineering Design Institute (Beijing Jianzhu University) and Shen Donghua, Chief Engineer of Shenzhen Zhongankang Medical Engineering Co., Ltd. Association expert consultant appointment letter.
Medical Design and Cleansing Department Design
Dean Liu Jianjun is the Dean of the Beijing Institute of Architectural Design and Design (Beijing Jianzhu University) Medical Design Institute, senior interior architect, senior medical technologist, expert medical process design lecturer. In 2004, he began to intervene in the hospital design and planning industry. With solid medical work foundation and realistic multi-year field experience, it can achieve seamless design and design, design and construction seamlessly, providing hospital builders with comprehensive, effective guidance and design services. Dean Liu gave a wonderful speech on "Design of Medical Process Design and Clean Surgery Department", using a combination of experience and theory, and adopting comprehensive and systematic professional knowledge and practical teaching, including a large number of practical methods and accurate The data won the applause of the trainees!
Before the start of the afternoon class, the first phase of the 2018 Shenzhen Clean Engineering Professional Training Course was held in a relaxed and active atmosphere. After the election, Huang Baohua, the general manager of the Shenzhen Huanan Decoration Group Co., Ltd. Administrative Operations Center, was appointed. The squad leader, Assistant Dean of the Design and Research Institute of Shenzhen Overseas Decoration Engineering Co., Ltd. Zhou Tian served as the executive squad leader, Cheng Ying, manager of the policy affairs department of Shenzhen Pengrun Construction Group Co., Ltd., as a member of the study committee, and Liang Kun, executive secretary of the Shenzhen Clean Industry Association, elected The class committee issued an offer letter.
(From left to right: squad leader Huang Baohua, executive squad leader Zhou Tian, study committee member Cheng Ying)
Dr. Hou Dongming's lecture - "Purification of Air Conditioning Theory and Energy Saving"
Dr. Hou Dongming graduated from Tsinghua University with a major in air-conditioning engineering, a doctor of engineering, and a senior engineer. He is mainly engaged in the research and development of central air-conditioning energy-saving technologies and products, including: (1) first proposed double-cooled source temperature and humidity controlled air conditioning system in China. The concept and put it into practice, and obtained 6 related patents. By reconfiguring the existing air conditioning system, the technology can reduce the overall energy consumption of the air conditioning system by more than 30%. (2) In the energy-saving planning, energy-saving diagnosis and energy-saving renovation of industrial enterprises, the first to propose the industrial application of Tai (yang)-air (gas) energy, no reheating constant temperature and humidity, new air system double-effect heat recovery and other systems The solution has been successfully applied in tobacco, pharmaceutical and other industries, achieving more than 40% energy saving effect. (3) In the field of industrial cleansing and bio-cleaning, he has participated in the design, equipment manufacturing and project implementation of hundreds of clean surgical departments, biological laboratories and industrial clean air-conditioning systems, and has rich practical experience.
Before the start of the morning of the 29th, Wang Huifang, secretary general of the Shenzhen Clean Industry Association, presented the appointment letter of the expert consultant of Shenzhen Clean Industry Association to Xu Dongyu, deputy director of the Coatings Laboratory of Shenzhen Institute of Metrology and Quality Inspection.
Director Xu Dongyu's lecture - "Interpretation of Shenzhen City Building Decoration and Coatings and Adhesive Quality Supervision Standards"
Director Xu Dongyu is the deputy director of the Coatings Laboratory of Shenzhen Institute of Metrology and Quality Inspection, senior engineer, expert of science and technology experts of Shenzhen Science and Technology Expert Committee, and member of Shenzhen Analytical Testing Association. Since 2009, Shenzhen Institute of Metrology and Quality Testing has been working on quality testing, standard drafting and scientific research for coatings, adhesives and environmentally friendly products.
Over the years, he has been presiding over the annual quality supervision tasks of coatings and adhesives related products of the Shenzhen Municipal Market and Quality Supervision and Management Committee, and has repeatedly undertaken the VOC verification and monitoring tasks of the Shenzhen Habitat Environment Committee. Drafted 8 national standards, 3 special economic zones in Shenzhen, 2 scientific research projects of the General Administration of Quality Supervision, Inspection and Quarantine, and 1 scientific research project of the Guangdong Provincial Quality Supervision Bureau. 1 invention patent. Published 7 Chinese-level core scientific papers and 2 SCI papers.
Listening to the scene
Shen Donghua engineer lectures - "Engineering Practice and Case Analysis"
Shen Donghua engineer graduated from Jilin University of Technology in 1982, senior engineer, first-class construction engineer, member of Shenzhen Decoration Association expert library, member of China Building Medical Expert Library. In 2002, he entered the medical purification engineering industry. He once worked as deputy general manager and chief engineer of Shenzhen Huijian Medical Engineering Co., Ltd. and chief engineer of Shenzhen Zhongankang Medical Engineering Co., Ltd., and has rich design and construction for medical purification engineering and laboratory engineers. experience. He has participated in the construction of dozens of medical purification projects and participated in the preparation of the "Guidelines for the Construction of Chinese Hospitals".
After the end of the afternoon class, the exam session was held, and everyone answered the questions with seriousness.
After the training, the first phase of the 2018 Shenzhen Clean Engineering Professional Technical Training held by the Shenzhen Clean Industry Association in the past two days won the unanimous praise of all participants, and they said that they will pay close attention to the association's dynamics and continue to participate. A training session.
Group Photo of All Trainees